| |
| Stormwater
Systems » Rainwater Harvesting |
 |
| |
1.
|
AUSDRAIN™ EnviroModule
Re-use System |
| |
Residential Application |
| |
Casuarina Beach, NSW |
| |
|
The AUSDRAIN™ EnviroModule
Re-use System is supplied as a complete package and ranges
in size from 2000 litres to 20,000 litres. The system
can be installed by hand following an easy step-by-step
installation instruction.
A pre-fabricated liner and lid are made to size depending
on the size of the tank. The number of modules required
to create the tank capacity are then supplied and placed
inside the liner on top of and beside one another.
A 10 000 litre Re-use Tank was installed in the backyard
of a multi-million dollar beachfront home at Casuarina
Beach in northern NSW in October 2004. The tank was installed
within 3 hours ready for back filling and connections.
A submersible pump was installed on this job however;
an above ground pump may also be used when more pressure
is required.
This system has been designed for non-potable water uses
such as toilet flushing, laundries and external house
taps.
When installing the tank for irrigation purposes the tank
capacity and pumps pressure must be considered. |
| |
|
|
 |
|
 |
| |
|
|
| EnviroModules are assembled. |
|
First layer of modules
are placed inside liner. |
| |
|
|
 |
|
 |
| |
|
|
| Final layer of modules
are placed inside the liner. |
|
Lid is installed over
the base. |
| |
|
|
 |
|
 |
| |
|
|
| EnviroSump is placed
and sealed above the access chamber. |
|
Access chamber ready
for installation of submersible pump. |
| |
|
|
| |
|
|
|
|
